[Kea-users] Trying to get GeniesACS / Genexis running
DDFR | Ronald Blaas
ronald.blaas at ddfr.nl
Fri Jul 28 06:57:38 UTC 2023
Hi,
Yes, this is intended. I do this because I need to send the vendor ID with the options.
When I combine the option under 1 vendor ID it will not work.
Regards,
________________________________
Van: Kea-users <kea-users-bounces at lists.isc.org> namens Darren Ankney <darren.ankney at gmail.com>
Verzonden: donderdag 27 juli 2023 23:22
Aan: kea-users at lists.isc.org <kea-users at lists.isc.org>
Onderwerp: Re: [Kea-users] Trying to get GeniesACS / Genexis running
Hi,
I finally had a chance to look at this. I first have a question. I
see you have two classes with the same test line but with different
options. Any client that matches the test line will end up in both
classes. Is that intended? Or have you tried that in trying to get
both sets of vendor specific options included?
Thank you,
Darren Ankney
On Wed, Jul 26, 2023 at 3:16 AM DDFR | Ronald Blaas
<ronald.blaas at ddfr.nl> wrote:
>
>
> Hi
>
> Here is a snippet of the config.
>
> "option-def": [
> {
> "space": "vendor-3561",
> "name": "acs",
> "code": 11,
> "type": "string"
> },
> {
> "space": "vendor-3561",
> "name": "minwaitinterval",
> "code": 13,
> "type": "uint32"
> },
> {
> "space": "vendor-3561",
> "name": "retryintervalmultiplier",
> "code": 14,
> "type": "uint32"
> },
> {
> "space": "vendor-25167",
> "name": "fw",
> "code": 2,
> "type": "string"
> },
> {
> "space": "vendor-25167",
> "name": "config",
> "code": 3,
> "type": "string"
> }
> ],
> "client-classes": [
> {
> "name": "GenieACS",
> "test": "split(option[60].text, 0x2C, 2) == 'polar'",
> "option-data": [
> {
> "name": "vivso-suboptions",
> "data": "3561"
> },
> {
> "name": "acs",
> "space": "vendor-3561",
> "code": 11,
> "data": "http://xxxxxxx:7547/ACSServer/services/ACSServlet",
> "always-send": true
> },
> {
> "name": "minwaitinterval",
> "space": "vendor-3561",
> "code": 13,
> "data": "1",
> "always-send": true
> },
> {
> "name": "retryintervalmultiplier",
> "space": "vendor-3561",
> "code": 14,
> "data": "10",
> "always-send": true
> }
> ]
> },
> {
> "name": "Genexis",
> "test": "split(option[60].text, 0x2C, 2) == 'polar'",
> "option-data": [
> {
> "name": "vivso-suboptions",
> "data": "25167",
> },
> {
> "name": "config",
> "space": "vendor-25167",
> "code": 3,
> "data": "tftp://xxxxxx/test.cfg",
> "always-send": true
> }
> ]
> }
> ],
>
> If I understand the documantation correct this is how it is suppose to work. Please correct me if I am mistaken.
>
> Unfortunately, this config does not work. It does not give both settings to the CPE.
>
> With isc-dhcp one must encapsulate the options.
> * according to documantation:
> # GLOBAL SCOPE
> option space genexis;
> option genexis.fw code 2 = text;
> option genexis.config code 3 = text;
> option space vivso code width 4;
> option vivso.iana code 0 = string;
> option vivso.iana 01:01:01;
> option vivso.genexis code 25167 = encapsulate genexis;
> option option125 code 125 = encapsulate vivso;
> # SUBNET, POOL OR GROUP SCOPE
> option genexis.fw “tftp://192.168.42.225/geneos-lunar-3.14.0-R.img”;
> option genexis.config “tftp://192.168.42.225/”;
>
>
> if anyone has some idea how to get this to work would be great.
>
> Regards
>
>
>
> ________________________________
> Van: Darren Ankney <darren.ankney at gmail.com>
> Verzonden: maandag 24 juli 2023 20:30
> Aan: DDFR | Ronald Blaas <ronald.blaas at ddfr.nl>
> Onderwerp: Re: [Kea-users] Trying to get GeniesACS / Genexis running
>
> Hi,
>
> That would be fine. I notice that we somehow got off list here. It
> would be best if we took this back on list so that everyone can
> benefit? Future people with a similar question won't be able to see
> this discussion.
>
> On Mon, Jul 24, 2023 at 12:53 PM DDFR | Ronald Blaas
> <ronald.blaas at ddfr.nl> wrote:
> >
> > That is kinda what I am doing.
> > But it is not working.
> >
> > I can send you my config tomorrow if you'd like
> >
> > Regards
> >
> > ________________________________
> > Van: Darren Ankney <darren.ankney at gmail.com>
> > Verzonden: maandag 24 juli 2023 15:25
> > Aan: DDFR | Ronald Blaas <ronald.blaas at ddfr.nl>
> > Onderwerp: Re: [Kea-users] Trying to get GeniesACS / Genexis running
> >
> > Hi,
> >
> > Have a look at :
> > https://kea.readthedocs.io/en/kea-2.4.0/arm/dhcp4-srv.html#dhcpv4-vendor-specific-options
> > specifically the example containing "vendor-2234" and "vendor-3561".
> > Does this not show what you are trying to do?
> >
> > Thank you,
> >
> > Darren Ankney
> >
> > On Mon, Jul 24, 2023 at 7:58 AM DDFR | Ronald Blaas
> > <ronald.blaas at ddfr.nl> wrote:
> > >
> > > Hi Darren,
> > >
> > > I understand but the documentation does not speak of this in how to do this.
> > >
> > > I have tried specifing both vendor ID's but my device (a Genexis p2410) will only accept one.
> > >
> > > As per documentation from Genexis one need to encapsulate both. This is a part in where I am unsuccesfull
> > >
> > > I can get either one to work but not both
> > >
> > >
> > >
> > > ________________________________
> > > Van: Darren Ankney <darren.ankney at gmail.com>
> > > Verzonden: maandag 24 juli 2023 12:26
> > > Aan: DDFR | Ronald Blaas <ronald.blaas at ddfr.nl>
> > > Onderwerp: Re: [Kea-users] Trying to get GeniesACS / Genexis running
> > >
> > > Hi,
> > >
> > > From 2.4.0 release notes
> > > (https://downloads.isc.org/isc/kea/2.4.0/Kea-2.4.0-ReleaseNotes.txt):
> > >
> > > 6. **Multiple vendor options**: The Kea DHCPv4 server can now handle
> > > multiple `vivco-suboptions` options with different enterprise IDs [#467]
> > > and multiple vendor options with different enterprise IDs and multiple
> > > vivso suboptions. The vendor options handling has been updated [#1518,
> > > #2694]. Support has been added for multiple instances of the DHCPv6
> > > vendor-class (code 16) and vendor-opts (code 17) options. Kea now
> > > supports specifying multiple options with different enterprise numbers
> > > [#2517].
> > >
> > > So you should be able to do this in Kea 2.4.0.
> > >
> > > Thank you,
> > >
> > > Darren Ankney
> > >
> > > On Mon, Jul 24, 2023 at 3:27 AM DDFR | Ronald Blaas
> > > <ronald.blaas at ddfr.nl> wrote:
> > > >
> > > > Hi Darren
> > > >
> > > > That part of the documentation is well known to me 🙂
> > > > But I am facing a little different problem.
> > > >
> > > > I need to send all sub-options as option 125
> > > > I just have 2 different vendor-ids which needs to be encapsulated both in option 125
> > > >
> > > >
> > > >
> > > >
> > > > ________________________________
> > > > Van: Darren Ankney <darren.ankney at gmail.com>
> > > > Verzonden: vrijdag 21 juli 2023 12:17
> > > > Aan: DDFR | Ronald Blaas <ronald.blaas at ddfr.nl>
> > > > CC: kea-users at lists.isc.org <kea-users at lists.isc.org>
> > > > Onderwerp: Re: [Kea-users] Trying to get GeniesACS / Genexis running
> > > >
> > > > Hi,
> > > >
> > > > In that case, have a look at this section of the ARM:
> > > > https://kea.readthedocs.io/en/kea-2.4.0/arm/dhcp4-srv.html#dhcpv4-vendor-specific-options
> > > > which explains how to encapsulate both VIVCO (43) and VIVSO (125)
> > > > sub-options in Kea. I am not sure you'll be able to do all of the
> > > > things the vendor requires, however (such as option codes above 255 or
> > > > code widths of 4 which is what 32 bit integer?? I was not aware DHCP
> > > > supported that).
> > > >
> > > > > All these definitions should be added as subcodes of option 125
--
ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.
To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users.
Kea-users mailing list
Kea-users at lists.isc.org
https://lists.isc.org/mailman/listinfo/kea-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/kea-users/attachments/20230728/d9b29ba0/attachment-0001.htm>
More information about the Kea-users
mailing list