isc-dhcp-server 4.4.1
Samuel Motta
samuel at apoiotatico.com.br
Wed Feb 23 16:40:24 UTC 2022
Hi folks, I installed isc-dhcp-server 4.4.1 version on a Debian 11 and it
does not work here.
*here my ifconfig parse that show that I does not use ipv6*
enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255
ether fc:aa:14:f7:ae:45 txqueuelen 1000 (Ethernet)
RX packets 242347683 bytes 334820398436 (311.8 GiB)
RX errors 0 dropped 17209 overruns 0 frame 0
TX packets 151899938 bytes 181862408834 (169.3 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Loopback Local)
RX packets 3175 bytes 163958 (160.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3175 bytes 163958 (160.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
I´m trying to force *isc-dhcp-server* to only start the v4 instance with
INTERFACESv4 option that is the new directive
if I try to use interfaces directive like older versions syslog show me to
use INTERFACESv4 OPTION but it migrate automatically for now.
Feb 23 13:30:25 debian-backup isc-dhcp-server[388886]: DHCPv4 interfaces
are no longer set by the INTERFACES variable in
Feb 23 13:30:25 debian-backup isc-dhcp-server[388886]:
/etc/default/isc-dhcp-server. Please use INTERFACESv4 instead.
F
*here my /etc/default/isc-dhcp-server *
INTERFACESv4="enp2s0"
*here my dhcpd.conf*
ddns-update-style none;
#option definitions common to all supported networks...
#option domain-name "example.org";
#option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 691200;
max-lease-time 691200;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
failover peer "dhcp-failover" {
secondary;
address 192.168.0.3;
port 647;
peer address 192.168.0.2;
peer port 648;
max-response-delay 30;
max-unacked-updates 10;
load balance max seconds 5;
mclt 3600;
# split 255; // split value somente no principal
}
subnet 192.168.0.0 netmask 255.255.255.0 {
option domain-name-servers 192.168.0.5 ;
option routers 192.168.0.254 ;
option netbios-name-servers 192.168.0.5 ;
option ntp-servers 192.168.0.5 ;
option broadcast-address 192.168.0.255;
pool {
failover peer "dhcp-failover";
default-lease-time 691200;
max-lease-time 691200;
range 192.168.0.11 192.168.0.200;
}
}
*here my syslog (still trying load dhcpd6.conf but lauch IPv4 server only
that it is what I need.)*
Feb 23 13:19:01 debian-backup isc-dhcp-server[388778]:
/etc/init.d/isc-dhcp-server: 50: cannot open /etc/dhcp/dhcpd6.conf: No such
file
Feb 23 13:19:01 debian-backup isc-dhcp-server[388771]: Launching IPv4
server only.
Feb 23 13:19:01 debian-backup dhcpd[388780]: Internet Systems Consortium
DHCP Server 4.4.1
Feb 23 13:19:01 debian-backup dhcpd[388780]: Copyright 2004-2018 Internet
Systems Consortium.
Feb 23 13:19:01 debian-backup dhcpd[388780]: All rights reserved.
Feb 23 13:19:01 debian-backup dhcpd[388780]: For info, please visit
https://www.isc.org/software/dhcp/
Feb 23 13:19:01 debian-backup isc-dhcp-server[388771]: Starting ISC DHCPv4
server: dhcpddhcpd service already running (pid file /var/run/dhcpd.pid
currenty exists) ...
Feb 23 13:19:01 debian-backup isc-dhcp-server[388784]: failed!
Feb 23 13:19:01 debian-backup systemd[1]: isc-dhcp-server.service: Control
process exited, code=exited, status=1/FAILURE
Feb 23 13:19:01 debian-backup systemd[1]: isc-dhcp-server.service: Failed
with result 'exit-code'.
*here my syntax check of dhcpd.conf with no errors*
root at debian-backup:/etc/dhcp# dhcpd -t -cf /etc/dhcp/dhcpd.conf
Internet Systems Consortium DHCP Server 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Config file: /etc/dhcp/dhcpd.conf
Database file: /var/lib/dhcp/dhcpd.leases
PID file: /var/run/dhcpd.pid
I did find where is the problem. Any suggestion?
my best regards,
Samuel Motta
Brazil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20220223/e804524e/attachment.htm>
More information about the dhcp-users
mailing list