dhclient 4.2.1-P1 does not set IPv6 DNS servers
Andreas Meile
mailingliste at andreas-meile.ch
Sun Nov 6 10:19:30 UTC 2011
Hello Andrej
See my old mail post at
https://lists.isc.org/pipermail/dhcp-users/2011-August/013553.html
about the topic of a well working IPv6 autoconfiguration with stateless
DHCPv6.
----- Original Message -----
From: "Andrej Podzimek" <andrej.podzimek at gmail.com>
To: <dhcp-users at lists.isc.org>
Sent: Saturday, November 05, 2011 4:57 AM
Subject: dhclient 4.2.1-P1 does not set IPv6 DNS servers
> my network uses the following combination of radvd.conf flags:
>
> AdvManagedFlag off;
> AdvOtherConfigFlag on;
I also had set AdvSendAdvert = on
> The network consists of a Linux router with a 802.11n access point and an
> ethernet LAN. The
> correspoinding subnets are both configured as follows in dhcpd6.conf:
>
> subnet6 2002:****:****::/64 {
> option dhcp6.name-servers 2002:****:****::1;
> }
Here I used a little bit another conf file. See link above.
BTW: You can use the 2001:db8::/32[1] block to describe something in a
anonymized form.
> * A Windows 7 client works fine in the same network. After a couple of
> netsh commands, it will
> acquire the DNS address from DHCPv6 on each boot.
In my case, there was no need to change anything in Microsoft's registry. A
"out of the box" setuped Windows 7 immediately gets all it's necessary
configuration parameters.
Andreas
[1] http://www.ietf.org/rfc/rfc3849.txt
More information about the dhcp-users
mailing list