error in testing DHCPv6 relay using ISC code???

[ameen.shajahan at wipro.com]

Hi all,
                I have DHCP V6 Client ,Relay and server.

Client as windows 7 PC.
Relay as remote which has more than 1 interface.
Server as another remote which has only one interface.

>From relay I have connected to client and server.

Eth0 interface to client and Eth1 interface to server.


Client----eth0----->Relay-eth1--->server


But my problem is client getting the ipv6 address of a server while issuing ipconfig command in Windows7 Pc.

IPV6 address of Server  : 3ffe:501:ffff:100::/64
IPV6 address of Relay    : 3ffe:501:ffff:101::/64

But the client is getting IPV6 address 3ffe:501:ffff:100::/64 of a server. So there is no relay operation actually done here.

What would be the reason for this error??

Is there any different procedure to test this functionality.

Otherwise I should change anything in the address..

Please let me know.

Regards,
Ameen S


Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 

www.wipro.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20111213/c9dd5e19/attachment.html>