multipe dhcp pool via same interface

[Guillaume Vachon]

They are on different physical network so i will give a try to what you
said.
Many thanks for your time and help i will go read and try that!

Thanks again

On Mon, 2008-07-21 at 21:10 +0100, Simon Hobson wrote:

> Guillaume Vachon wrote:
> 
> >eth1 - LAN 172.24.50.8
> >
> >there is already a dhcp pool configured on eth1 serving 172.24.50.0/24
> >
> >I need to add/create these pool serving 172.24.51.0/24
> >                                                                172.24.53.0/24
> >                                                                 172.24.54.0/24
> >
> >going through the same NIC the one in charge of the routeur will 
> >make sure everything on the corect subnet
> 
> If these other subnets are on different physical networks then all 
> you need to do is in my last message - if any of them share a 
> physical piece of wire then things are slightly different.
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20080721/239286e7/attachment.html>