Configuration & Running of DHCP server in a Solaris Container

[Paul Cassidy - Sun Microsystems - Solution Integration Engineer]

I'm trying to run the dhcp server in a Solaris 10 container/zone. The 
server has built and
installed without issue. But I am unable to start the server as it 
cannot find the loopback
interface lo0.

Internet Systems Consortium DHCP Server V3.1.0
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Wrote 0 deleted host decls to leases file.
Wrote 0 new dynamic host decls to leases file.
Wrote 0 leases to leases file.
Can't get interface flags for lo0: No such device or address

The container/zone does not have this interface, as it is a logical 
mapped onto the global zone. The config
only requires serving requests on the qfe4:1 interface

lo0:3: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 
8232 index 1
        inet 127.0.0.1 netmask ff000000
qfe4:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> 
mtu 1500 index 7
        inet 192.168.20.232 netmask ffffff00 broadcast 192.168.20.255

very basic config file:-

        ddns-update-style ad-hoc;

        subnet 127.0.0.0 netmask 255.0.0.0 {
        }

        subnet 129.159.0.0 netmask 255.255.0.0 {
        }

        subnet 192.168.20.0 netmask 255.255.255.0 {
                range 192.168.20.10 192.168.20.100;
        }

        host etherlite01 {
                hardware ethernet 00:A0:E7:21:B7:DE;
                fixed-address 192.168.20.10;
                filename "/tftpboot/80007009_E.bin";
        }

Can anyone help, or is this a none starter?

-- 
       Paul Cassidy,
       Solutions Integration Engineer
 ,_,   Sun Microsystems,               Tel: +44 (0) 1506 673 645
(O,O)  Linlithgow, EH49 7LR                              x73 645
(   )  Scotland.                       Mob: +44 (0) 7979 700 344
-"-"------------------------------------------------------------
               :PRIVACY & CONFIDENTIALITY NOTICE:
The information  contained in  this  e-mail and  any attachments
is intended for  the named  recipient(s) only,  unless otherwise
waived in writing  by me. It may contain privileged, proprietary
and/or  confidential information.  If you are  not the  intended
recipient, you must not copy, forward or distribute. If you have
received  this e-mail  in error, please  notify me  immediately.
----------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20070907/9ea2556e/attachment.html>