No Failover works, Failover does not work

[Shlomo Dubrowin]

OK, so I switched the peer ports to 519 and 520.
Now, when I try to get an address, these messages were recorded.  (Franklin
is the primary DHCP Server, the MAC Address listed is my machine, and the IP
10.153.22.1 is the router IP for the VLAN that is configured as the relay
agent.):*

*messages:May 17 21:18:37 franklin dhcpd: DHCPDISCOVER from
00:12:3f:1a:60:c3 via 10.153.22.1: not responding (recovering)
messages:May 17 21:18:42 franklin dhcpd: DHCPDISCOVER from 00:12:3f:1a:60:c3
via 10.153.22.1: not responding (recovering)
messages:May 17 21:18:50 franklin dhcpd: DHCPDISCOVER from 00:12:3f:1a:60:c3
via 10.153.22.1: not responding (recovering)
messages:May 17 21:19:06 franklin dhcpd: DHCPDISCOVER from 00:12:3f:1a:60:c3
via 10.153.22.1: not responding (recovering)

So which machine isn't responding?  the machine trying to get an address
(the MAC Address) or the cisco router with the IP?

  Shlomo

On 5/17/06, Shlomo Dubrowin <shlomo at dubrowin.org> wrote:
>
> OK, I can try that, the documentation I was following said they could be
> the same.  thanx.
>
>   Shlomo
>
>
> On 5/17/06, Karen Pachla < kpachla at umich.edu> wrote:
> >
> > Hi,
> >
> > On my configuration, I have primary's port at 519, secondary as 520
> >
> > Primary:
> >         port 519;
> >         peer port 520;
> >
> > Secondary:
> >         port 520;
> >         peer port 519;
> >
> >
> > On Wed, 2006-05-17 at 20:51 +0300, Shlomo Dubrowin wrote:
> >
> > > Primary Config:
> > > -----------------------
> > > failover peer "dhcp-failover" {
> > >         primary; # declare this to be the primary server
> > >         address 10.153.100.26;
> > >         port 520;
> > >         peer address 10.153.100.27;
> > >         peer port 520;
> > >         max-response-delay 30;
> > >         max-unacked-updates 30;
> > >         load balance max seconds 3;
> > >         mclt 1800;
> > >         split 128;
> > > }
> > >
> > > include "/etc/dhcpd.pools";
> > >
> > >
> > > Secondary Config:
> > > ----------------------------
> > > failover peer "dhcp-failover" {
> > >         Secondary; # declare this to be the secondary server
> > >         address 10.153.100.27;
> > >         port 520;
> > >         peer address 10.153.100.26;
> > >         peer port 520;
> > >         max-response-delay 30;
> > >         max-unacked-updates 30;
> > >         load balance max seconds 3;
> > >         mclt 1800;
> > > }
> >
> > --
> > K. Pachla
> > LSAIT
> > University of Michigan
> >
> >
> >
>
>
> --
> -----------------------------------------------------------------------
>
>   ,-~~-.___.    ._.
> / |  '     \   | |"""""""""|           Shlomo Dubrowin
> (  )         0  | |         |             (Sheldon)
> \_/-, ,----'   | |         |
>     ====        !_!--v---v--"
>     /  \-'~;      |""""""""|             shlomo at dubrowin.org
>    /  __/~| ._-""||        |          http://www.dubrowin.org
> =(  _____|_|____||________|
> -----------------------------------------------------------------------
>



-- 
-----------------------------------------------------------------------
  ,-~~-.___.    ._.
/ |  '     \   | |"""""""""|           Shlomo Dubrowin
(  )         0  | |         |             (Sheldon)
\_/-, ,----'   | |         |
    ====        !_!--v---v--"
    /  \-'~;      |""""""""|            shlomo at dubrowin.org
   /  __/~| ._-""||        |          http://www.dubrowin.org
=(  _____|_|____||________|
-----------------------------------------------------------------------