dig +norecurse behaviour changed with 9.16.33

Veronique Lefebure veronique.lefebure at cern.ch
Thu Oct 27 12:28:10 UTC 2022


Well,


So here a bit more details.
Sorry, I cannot take an example with a DNS server accessible to you (*)  because they have all been upgraded to 9.16.


The .cern.ch contains:


spectrum-lb IN NS ip-dns-1.cern.ch.
spectrum-lb IN NS ip-dns-2.cern.ch.
spectrum IN CNAME spectrum-lb.cern.ch.



and 


spectrum-lb.cern.ch contains:

$ORIGIN .
$TTL 60 ; 1 minute
spectrum-lb.cern.ch IN SOA ip-dns-1.cern.ch. internal-dns.cern.ch. (
273 ; serial
3600 ; refresh (1 hour)
300 ; retry (5 minutes)
3600000 ; expire (5 weeks 6 days 16 hours)
60 ; minimum (1 minute)
)
NS ip-dns-1.cern.ch.
NS ip-dns-2.cern.ch.
A xxx.xxx.xx.140







named configuration file is identical between 9.11 and 9.16 except for the following options that we have added for 9.16:


#BIND916 options
qname-minimization disabled;
stale-answer-enable no;
stale-refresh-time 0; #default is 30
max-stale-ttl 1w;
dnssec-policy none;
synth-from-dnssec no;
min-cache-ttl 0;
min-ncache-ttl 0;
minimal-responses no;












(*) On an external DNS server you can try with the following similar case:


Running DiG 9.11.21 on a linux client 
 
ext-dns-1 (192.65.187.5) runs BIND9.16:
 
dig @ext-dns-1 foundservices.cern.ch | grep flags | grep ANSWER
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1

 
dig @ext-dns-1 foundservices.cern.ch +norecurse | grep flags | grep ANSWER
;; flags: qr aa ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1

 
 
Full output:
 

dig @192.65.187.5 foundservices.cern.ch +norecurse
; <<>> DiG 9.11.21 <<>> @192.65.187.5 foundservices.cern.ch +norecurse
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 9899
;; flags: qr aa ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 1232
; COOKIE: 8786b980a1a80a7901000000635a7898a512a21aa6138faf (good)
;; QUESTION SECTION:
;foundservices.cern.ch. IN A
;; ANSWER SECTION:
foundservices.cern.ch. 900 IN CNAME db-lb-1234.cern.ch.
;; Query time: 2 msec
;; SERVER: 192.65.187.5#53(192.65.187.5)
;; WHEN: Thu Oct 27 14:24:56 CEST 2022
;; MSG SIZE rcvd: 103

 
 
ip-dns-0 runs BIND9.11:
 
dig @ip-dns-0 foundservices.cern.ch | grep flags | grep ANSWER
;; flags: qr aa rd; QUERY: 1, ANSWER: 2, AUTHORITY: 2, ADDITIONAL: 4

 
dig @ip-dns-0 foundservices.cern.ch +norecurse | grep flags | grep ANSWER
;; flags: qr aa; QUERY: 1, ANSWER: 2, AUTHORITY: 2, ADDITIONAL: 4





Does that help ?


Greg, can I send you a pcap file in a private email ?




Thanks,
Veronique > On 27/10/2022 10:09 Greg Choules <gregchoules+bindusers at googlemail.com> wrote:
> 
> 
> 
> 
> Hi Veronique.
> No, we cannot easily reproduce this behaviour because we have no knowledge of the configs of either of those servers, the details of the zones you have configured, the contents of those zones or of the system on which you are running the dig command.
> 
> 
> 
> As I said, we need to see everything please:
> - Full digs, not +short
> - you have specified @ip-dns0 and @ip-dns1 - the full configs of both of those servers please, including zone definitions and contents for where "spectrum.cern.ch <http://spectrum.cern.ch/>" lives as it is not a name that can be resolved from the public Internet
> - a binary pcap file, using the -w option of tcpdump, capturing all port 53 traffic (UDP and TCP) between this machine and both DNS servers.
> 
> 
> By the way, when using the @<server> option of dig please use explicit IP addresses, not names. If you use a name, then dig first has to resolve that name and the place it will go to do that is resolv.conf. So it is now dependent on your system DNS setup to get an IP address to send the dig to.
> Also, you have specified @<simple_host_name> not @<FQDN>. This suggests to me that in resolv.conf you have a 'search' list. Personally I don't like search lists because they potentially increase the workload of the DNS system generally, lengthen query times and mean that you can't be sure exactly where an answer came from.
> 
> 
> Thanks, Greg
> 
> 
> 
> 
> On Thu, 27 Oct 2022 at 08:08, Veronique Lefebure <veronique.lefebure at cern.ch <mailto:veronique.lefebure at cern.ch>> wrote:
> > 
> > Hi all,
> > 
> > 
> > yes, here is a concrete example:
> > 
> > 
> > # ip-dns-1 runs BIND 9.16.33:
> > 
> > 
> > dig @ip-dns-1 spectrum.cern.ch <http://spectrum.cern.ch> +short +norecurse
> > spectrum-lb.cern.ch <http://spectrum-lb.cern.ch>.     <------------- Here we get only the CNAME
> > 
> > 
> > 
> > # ip-dns-0 runs BIND 9.11:
> > 
> > 
> > dig @ip-dns-0 spectrum.cern.ch <http://spectrum.cern.ch> +short +norecurse
> > spectrum-lb.cern.ch <http://spectrum-lb.cern.ch>.
> > xxx.xxx.xx.140         <-------- Here we get in addition the IP of spectrum-lb.cern.ch <http://spectrum-lb.cern.ch>.
> > 
> > 
> > 
> > 
> > 
> > And yes, a capture shows confirms indeed that dig returns less information when the BIND 9.16.33 DNS server is used.
> > 
> > 
> > I guess you can easily reproduce that behaviour, unless it is due to a mis-configuration bit on our DNS server ?
> > 
> > 
> > Thanks,
> > Véronique
> > 
> > > On 26/10/2022 21:04 Greg Choules <gregchoules+bindusers at googlemail.com <mailto:gregchoules%2Bbindusers at googlemail.com>> wrote:
> > > 
> > > 
> > > 
> > > 
> > > Hi Veronique.
> > > As other people have said, more details please.
> > > 
> > > 
> > > To have a complete picture of what is going on, not only would we need to know what your dig tests look like, but also where dig is sending its queries and how that DNS server is configured.
> > > 
> > > 
> > > You can tell dig to send queries anywhere, using @<server>. However, if you don't use that it will default to using the nameservers in /etc/resolv.conf. So it may be useful to see the contents of that.
> > > 
> > > 
> > > Wherever dig is sending its queries, we would need to know what that server will do with them. So its configuration would also be useful.
> > > 
> > > 
> > > Lastly, the best way to see queries and responses, right down to the nuts and bolts, is with a packet capture.
> > > 
> > > 
> > > 
> > > 
> > > You thought this was an easy question, huh ;)
> > > 
> > > Can you provide at least some of these things, to get started?
> > > 
> > > 
> > > Cheers, Greg
> > > 
> > > 
> > > On Wed, 26 Oct 2022 at 16:41, Veronique Lefebure <veronique.lefebure at cern.ch <mailto:veronique.lefebure at cern.ch>> wrote:
> > > > 
> > > > Hi,
> > > > 
> > > > 
> > > > dig answer is different between BIND 9.11 and BIND 9.16(.33) when +norecurse option is used.
> > > > Is this documented somewhere ?
> > > > 
> > > > 
> > > > Is there an option that needs to be set so that the behaviour of 9.16 is the same as the one in 9.11.
> > > > 
> > > > 
> > > > The change is that with 9.16, if the requested name is a CNAME, only the CNAME value is returned by dig, while with 9.11 dig would return both the CNAME value and the IP of the CNAME.
> > > > 
> > > > 
> > > > Thanks,
> > > > Veronique --
> > > > Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list
> > > > 
> > > > ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.
> > > > 
> > > > 
> > > > bind-users mailing list
> > > > bind-users at lists.isc.org <mailto:bind-users at lists.isc.org>
> > > > https://lists.isc.org/mailman/listinfo/bind-users
> > >   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/bind-users/attachments/20221027/9a69620e/attachment-0001.htm>


More information about the bind-users mailing list