ACL

[Bob McDonald]

I think what you are looking for is:

acl test0 { !192.168.1.50/32; 192.168.1.0/24; };

http://jodies.de/ipcalc is a good resource for checking. (As was mentioned
by Reindl...)

Learning basic sub-netting of IP addresses (Both IPv4 and IPv6) takes time
but it's necessary for DNS configuration. There's plenty of other resources
out there. (Try googling sub-netting with or without the hyphen)

Hope that helps,

Bob

> Message: 1
> Date: Sat, 8 Oct 2016 15:14:36 +0200
> From: Pol Hallen <bindml at fuckaround.org>
> To: Bind Users <bind-users at lists.isc.org>
> Subject: acl
> Message-ID: <fb1d9827-71ee-ff59-4d2c-9262c8cd9ca5 at fuckaround.org>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Hi all :-)
>
> can someone advice me about a fully howto / handbook to understand ACL?
>
> I need to permit all network 192.168.1/24 and deny 192.168.1.50/24 host:
>
> acl test0 { !192.168.1.50/24; 192.168.1/24;};
>
> thanks for help!
>
> Pol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/bind-users/attachments/20161009/e48c6fdb/attachment.html>