socket: too many open file descriptors
pollex
andres.vidoz at gmail.com
Fri Dec 5 11:59:23 UTC 2008
On 4 dic, 19:43, Mark Andrews <Mark_Andr... at isc.org> wrote:
> In message <6def172b-5126-45ac-9f9d-420185abd... at v13g2000yqm.googlegroups.com>,
>
>
>
> pollex writes:
> > On 4 dic, 10:59, Mark Andrews <Mark_Andr... at isc.org> wrote:
> > > =A0 =A0 =A0 =A0 --enable-threads=3Dyes
>
> > > In message <85e79363-8e52-43bc-8fa7-d66b4f180... at v4g2000yqa.googlegroups.=
> > com>,
>
> > > pollex writes:
> > > > On 3 dic, 21:08, Mark Andrews <Mark_Andr... at isc.org> wrote:
> > > > > In message <03541aa5-b28c-4177-92eb-670dd96b3... at 13g2000yql.googlegro=
> > ups.=3D
> > > > com>,
>
> > > > > pollex writes:
> > > > > > Hi Jinmei I have followed your advice and I have installed and
> > > > > > compiled the Bind 9.3.6 with the following command:
> > > > > > STD_CDEFINES=3D3D"-ISC_SOCKET_FDSETSIZE=3D3D4096" ./configure --pre=
> > fix=3D3D/u=3D
> > > > sr/
> > > > > > local/bind9.3.6 --enable-threads
> > > > > > But now I have the following issue, I can't start bind with multi
> > > > > > threading...
> > > > > > I have in the init script the lines:
> > > > > > OPTIONS=3D3D"-u bind -n 8 -t /var/lib/named -c /etc/bind/named.conf"
> > > > > > and in the start part:
> > > > > > mount --bind /proc/ /var/lib/named/proc/ -o ro (This is needed beca=
> > use
> > > > > > bin runs in jail)
>
> > > > > > Any idea? (With the previous version this works ok)
>
> > > > > =3DA0 =3DA0 =3DA0 =3DA0 Log messages would be useful.
>
> > > > > =3DA0 =3DA0 =3DA0 =3DA0 What does the following report?
> > > > > =3DA0 =3DA0 =3DA0 =3DA0 "named -g -u bind -n 8 -t /var/lib/named -c /=
> > etc/bind/nam=3D
> > > > ed.conf"
>
> > > > > > Thanks for all
>
> > > > > > _______________________________________________
> > > > > > bind-users mailing list
> > > > > > bind-us... at lists.isc.org
> > > > > >https://lists.isc.org/mailman/listinfo/bind-users
>
> > > > > --
> > > > > Mark Andrews, ISC
> > > > > 1 Seymour St., Dundas Valley, NSW 2117, Australia
> > > > > PHONE: +61 2 9871 4742 =3DA0 =3DA0 =3DA0 =3DA0 =3DA0 =3DA0 =3DA0 =3DA=
> > 0 INTERNET: Mark_And=3D
> > > > r... at isc.org
> > > > > _______________________________________________
> > > > > bind-users mailing list
> > > > > bind-us... at lists.isc.orghttps://lists.isc.org/mailman/listinfo/bind-u=
> > sers
>
> > > > Mark, thanks for the reply
> > > > this is the report:
> > > > 04-Dec-2008 09:52:54.950 starting BIND 9.3.6 -g -u bind -n 8 -t /var/
> > > > lib/named -c /etc/bind/named.conf
> > > > 04-Dec-2008 09:52:54.950 using up to 4096 sockets
> > > > 04-Dec-2008 09:52:54.954 loading configuration from '/etc/bind/
> > > > named.conf'
> > > > 04-Dec-2008 09:52:54.956 using default UDP/IPv4 port range: [1024,
> > > > 65535]
> > > > 04-Dec-2008 09:52:54.956 using default UDP/IPv6 port range: [1024,
> > > > 65535]
> > > > 04-Dec-2008 09:52:54.958 listening on IPv4 interface lo, 127.0.0.1#53
> > > > 04-Dec-2008 09:52:54.958 could not listen on UDP socket: address in
> > > > use
>
> > > 04-Dec-2008 09:52:54.958 creating IPv4 interface lo failed; interface
>
> > > > ignored
> > > > 04-Dec-2008 09:52:54.958 listening on IPv4 interface eth1,
> > > > ###.###.#.### #53
> > > > 04-Dec-2008 09:52:54.958 could not listen on UDP socket: address in
> > > > use
> > > > 04-Dec-2008 09:52:54.958 creating IPv4 interface eth1 failed;
> > > > interface ignored
> > > > 04-Dec-2008 09:52:54.958 not listening on any interfaces
> > > > 04-Dec-2008 09:52:54.959 /etc/bind/named.conf:80: couldn't add command
> > > > channel 127.0.0.1#953: address in use
> > > > 04-Dec-2008 09:52:54.959 ignoring config file logging statement due to
> > > > -g option
> > > > 04-Dec-2008 09:52:54.960 additionally listening on IPv4 interface lo,
> > > > 127.0.0.1#53
> > > > 04-Dec-2008 09:52:54.960 could not listen on UDP socket: address in
> > > > use
> > > > 04-Dec-2008 09:52:54.960 creating IPv4 interface lo failed; interface
> > > > ignored
> > > > 04-Dec-2008 09:52:54.960 additionally listening on IPv4 interface
> > > > eth1, ###.###.#.### #53
> > > > 04-Dec-2008 09:52:54.960 could not listen on UDP socket: address in
> > > > use
> > > > 04-Dec-2008 09:52:54.960 creating IPv4 interface eth1 failed;
> > > > interface ignored
> > > > 04-Dec-2008 09:52:54.961 zone 0.in-addr.arpa/IN: loaded serial 1
> > > > 04-Dec-2008 09:52:54.961 zone 127.in-addr.arpa/IN: loaded serial 1
> > > > 04-Dec-2008 09:52:54.962 zone 255.in-addr.arpa/IN: loaded serial 1
> > > > 04-Dec-2008 09:52:54.962 /etc/bind/db.bind:5: class 'CH' !=3D3D zone cl=
> > ass
> > > > 'IN'
> > > > 04-Dec-2008 09:52:54.962 zone bind/IN: loading master file /etc/bind/
> > > > db.bind: bad class
> > > > 04-Dec-2008 09:52:54.962 zone localhost/IN: loaded serial 1
> > > > 04-Dec-2008 09:52:54.962 running
> > > > 04-Dec-2008 09:52:56.244 shutting down
> > > > 04-Dec-2008 09:52:56.245 exiting
>
> > > > In the other version i had a line like this
> > > > found X CPUs, using X worker threads
>
> > > > Thanks again
> > > > _______________________________________________
> > > > bind-users mailing list
> > > > bind-us... at lists.isc.org
> > > >https://lists.isc.org/mailman/listinfo/bind-users
>
> > > --
> > > Mark Andrews, ISC
> > > 1 Seymour St., Dundas Valley, NSW 2117, Australia
> > > PHONE: +61 2 9871 4742 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 INTERNET: Mark_And=
> > r... at isc.org
> > > _______________________________________________
> > > bind-users mailing list
> > > bind-us... at lists.isc.orghttps://lists.isc.org/mailman/listinfo/bind-users
>
> > Ok Mark, I can try that...
> > But in the config.log I see the lines:
> > checking whether to build with thread support... yes
> > checking whether to build with threads... yes
>
> > So I think putting only --enable-threads is the same.
>
> Run "grep THREAD config.log" and post what it returns.
>
>
>
> > _______________________________________________
> > bind-users mailing list
> > bind-us... at lists.isc.org
> >https://lists.isc.org/mailman/listinfo/bind-users
>
> --
> Mark Andrews, ISC
> 1 Seymour St., Dundas Valley, NSW 2117, Australia
> PHONE: +61 2 9871 4742 INTERNET: Mark_Andr... at isc.org
> _______________________________________________
> bind-users mailing list
> bind-us... at lists.isc.orghttps://lists.isc.org/mailman/listinfo/bind-users
This is the result for:
grep THREAD in config.log
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
| #define HAVE_LIBPTHREAD 1
| #define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
| #define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
| #define HAVE_LINUXTHREADS 1
ISC_PLATFORM_BRACEPTHREADONCEINIT='#undef
ISC_PLATFORM_BRACEPTHREADONCEINIT'
ISC_PLATFORM_USETHREADS='#define ISC_PLATFORM_USETHREADS 1'
ISC_THREAD_DIR='pthreads'
#define HAVE_LIBPTHREAD 1
#define HAVE_PTHREAD_ATTR_GETSTACKSIZE 1
#define HAVE_PTHREAD_ATTR_SETSTACKSIZE 1
#define HAVE_LINUXTHREADS 1
and grep thread in config.log
./configure --prefix=/usr/local/bind9.3.6 --enable-threads
Configured with: ../src/configure -v --enable-languages=c,c+
+,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-
system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-
threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit
--enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-
checking=release x86_64-linux-gnu
configure:6498: checking whether to build with thread support
configure:7005: checking for pthread_create in -lpthread
configure:7040: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lpthread >&5
configure:7476: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lpthread >&5
configure:7716: checking for pthread_attr_getstacksize
configure:7772: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lpthread >&5
configure:7805: checking for pthread_attr_setstacksize
configure:7861: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lpthread >&5
configure:8175: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lpthread >&5
configure:8258: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lscf -lpthread >&5
configure:8355: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lpthread >&5
configure:8443: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lpthread >&5
configure:8479: checking whether to build with threads
configure:8690: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lpthread >&5
configure:8773: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lsocket -lpthread >&5
configure:8844: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:24727: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:24786: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:24988: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:25042: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:25106: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:25173: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:25233: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:25959: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:26046: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:26133: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:26224: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:26408: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
linet6 -L/usr/local/v6/lib -lnsl -lpthread >&5
configure:26614: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:26696: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:26785: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:26880: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:26969: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:27115: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:27211: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:27292: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:27387: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:27627: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:27865: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
configure:28789: gcc -o conftest -g -O2 -D_GNU_SOURCE conftest.c -
lnsl -lpthread >&5
config.status:857: creating lib/isc/pthreads/Makefile
config.status:857: creating lib/isc/pthreads/include/Makefile
config.status:857: creating lib/isc/pthreads/include/isc/Makefile
configure:31062: running /bin/sh ./configure '--prefix=/usr/local/
bind9.3.6' '--enable-threads' --cache-file=/dev/null --srcdir=.
ac_cv_func_pthread_attr_getstacksize=yes
ac_cv_func_pthread_attr_setstacksize=yes
ac_cv_lib_pthread_pthread_create=yes
BUILD_LIBS='-lnsl -lpthread '
ISC_THREAD_DIR='pthreads'
LIBS='-lnsl -lpthread '
I really don't see anything wrong...
More information about the bind-users
mailing list