Problem with reverse lookup in CIDR delegated domain [file details]

[Jim]

On Fri, 05 Mar 2004 08:23:41 +1100, Mark Andrews wrote:

>> On Thu, 04 Mar 2004 00:40:14 -0500, Barry Margolin wrote:
>> > In article <c25oe6$1pg$1 at sf1.isc.org>, Jim <me at privacy.net> wrote:
>> >> Didn't add this record as I'm connected 242 x 7 static IP
>> > And it never fails?
>> 
>> Yes, it does. I posted twice in response to Mark's second post on
>> the subject. First to apologise for not following advise I'd asked
>> for. Second to ask what I put in the file for the slave zone.
>> Neither post has made it back to my news server yet. Might be
>> lost in the bit bucket.
>> 
>> Jim
> 
> 	You don't put anything in the file.  Named will transfer
> 	the zone contents from the servers listed in the masters
> 	clause.
> 
> 	Mark

I corrected /etc/named.conf and have this in it:
 
zone "182.116.67.in-addr.arpa" {
        type slave;
        file "s/named.67.116.182";
        masters { 206.13.28.11; 206.13.29.11; };
        notify no;
};
 
zone "184.182.116.67.in-addr.arpa" {
        type master;
        file "m/named.67.116.182.184";
        notify yes;
};
 
Restarted named and here is the syslog:

named[4364]: starting BIND 9.2.2-P3
named[4364]: using 1 CPU
named[4364]: loading configuration from '/etc/named.conf'
named[4364]: no IPv6 interfaces found
named[4364]: listening on IPv4 interface lo, 127.0.0.1#53
named[4364]: listening on IPv4 interface eth0, 67.116.182.186#53
named[4364]: command channel listening on 127.0.0.1#953
named[4364]: zone 0.0.127.in-addr.arpa/IN: loaded serial 13
named[4364]: zone 184.182.116.67.in-addr.arpa/IN: loaded serial 13
named[4364]: zone jms-corp.net/IN: loaded serial 13
named[4364]: running
named[4364]: zone jms-corp.net/IN: sending notifies (serial 13)
named[4364]: zone 184.182.116.67.in-addr.arpa/IN: sending notifies (serial 13)
named[4364]: transfer of '182.116.67.in-addr.arpa/IN' from 206.13.28.11#53: end
of transfer
named[4364]: transfer of '182.116.67.in-addr.arpa/IN' from 206.13.29.11#53: end
of transfer

*****************
ERRORS
*****************

named[4364]: transfer of '182.116.67.in-addr.arpa/IN' from 206.13.28.11#53: \
             failed while receiving responses: REFUSED 
named[4364]: transfer of '182.116.67.in-addr.arpa/IN' from 206.13.29.11#53: \
             failed while receiving responses: REFUSED


========================

Did some googling and found this URL:

http://www.csh.rit.edu/~jon/text/papers/classless/

The example shown for the entry in named.conf is:

zone "64/27.7.126.206.in-addr.arpa" {
     type slave;
     file "64-27.7.126.206.rev";
     masters { 206.126.7.65; };
};

So should my slave zone be in this style syntax to only transfer
the records delegated to me? Like this?

zone "184/29.182.116.67.in-addr.arpa" {
     type slave;
     file "184-29.182.116.67.rev";
     masters { 206.13.28.11; 206.13.29.11; };
     notify no;
};

Jim

-- 

Quidquid latine dictum sit, altum viditur.