W2K AD update and Bind 9.2

[Michael E. Hanson]

Dumb Question, but have you verified that the file you are modifiying is the
one being used by the name server?  What zonefile is it actually loading up
for the zone in question?  Check your logs, BIND should tell you which file
its using as it loads each zone.

_______________
Michael E. Hanson
President, Gryphon Consulting Services
(http://www.GryphonsGate.com)
P.O. Box 1151
Bellevue, NE 68005-1151
(402) 871-9622

MEHanson at GryphonsGate.com (primary)
Gryphons_Master at yahoo.com


----- Original Message ----- 
From: "Lyn" <lynkempter at hotmail.com>
Newsgroups: comp.protocols.dns.bind
To: <comp-protocols-dns-bind at isc.org>
Sent: Thursday, November 13, 2003 3:15 AM
Subject: Re: W2K AD update and Bind 9.2


> > You say that you need to an NS record.  Can you tell us the entire
> > set of NS records in the zone, and tell us which one you want
> > removed?  Does the NS record you want removed point to the DC?
>
> There are 2 NS records: one to the primary DNS server, another to
> a secondary server further up the network chain.  It's this second
> one that I want to alter.
>
> I've taken the zone files back to bare nubs, left them only with the
> header info (SOA, serial number, TTL, etc), the 2 correct NS entries
> and only systems and IP addresses for the AD servers.  Then I've
> flushed caches on both ends, reloaded, restarted.... in a number of
> different combinations.  The file still updates with the old info,
> including the old serial number even though I updated the serial
> number as well.
>
> There are a couple of WINS servers out there, marginal ones, but I've
> not found any hint of NS records there.
>
> Thanks muchly for the help thus far.  This one really has me stumped.
>
> Lyn
>
>