No Response From Server

[Allie Syadiqin]

OK, I manage to get it to work after I add the IP for ns2.vserver.com.my 
(ie. 202.5.65.67) to listen-on options in named.conf. I hope that should 
work and any further advise would be greatly appreciated.

> >I am having problems when performing the following :-
> >
> >nslookup -q=any vserver.com.my ns2.vserver.com.my
> >
> >The response would be as follows :-
> >
> >*** Can't find server name for address 202.5.65.67: No response from server
> >*** Default servers are not available
>
>here´s what I get:
>
>dig @ns1.vserver.com.my vserver.com.my any
>
>; <<>> DiG 8.3 <<>> @ns1.vserver.com.my vserver.com.my any
>; (1 server found)
>;; res options: init recurs defnam dnsrch
>;; got answer:
>;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 6
>;; flags: qr aa rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 2, ADDITIONAL: 2
>;; QUERY SECTION:
>;;      vserver.com.my, type = ANY, class = IN
>
>;; ANSWER SECTION:
>vserver.com.my.         1H IN MX        10 mail.vserver.com.my.
>vserver.com.my.         1H IN NS        ns1.vserver.com.my.
>vserver.com.my.         1H IN NS        ns2.vserver.com.my.
>vserver.com.my.         1H IN SOA       ns1.vserver.com.my.
>allie.time.net.my. (
>                                          2001000011      ; serial
>                                          6H              ; refresh
>                                          1H              ; retry
>                                          1W              ; expiry
>                                          1H )            ; minimum
>
>vserver.com.my.         1H IN A         202.5.65.68
>
>;; AUTHORITY SECTION:
>vserver.com.my.         1H IN NS        ns1.vserver.com.my.
>vserver.com.my.         1H IN NS        ns2.vserver.com.my.
>
>;; ADDITIONAL SECTION:
>ns1.vserver.com.my.     1H IN A         202.5.65.66
>ns2.vserver.com.my.     1H IN A         202.5.65.67
>
>and
>
>dig @ns2.vserver.com.my vserver.com.my any
>
>; <<>> DiG 8.3 <<>> @ns2.vserver.com.my vserver.com.my any
>; (1 server found)
>;; res options: init recurs defnam dnsrch
>;; res_nsend to server ns2.vserver.com.my  202.5.65.67: Connection refused
>
>my guess is ns2 isn´t runnig a name service, or there´s firewall pb´s.
>
>Len
>
>
>
>
> >I have no problem when performing the same on ns1.vserver.com.my. The
> >reason I am using nslookup is because the local NIC Authority (MYNIC) will
> >perform the above queries before updating/adding domains. So this is a
> >problem that I need to resolve. Any help is appreciated and should you need
> >further info or configuration files, please tell me what you need and I
> >will post it. FYI, I am running Bind 8.2.3 on Immunix 7.0 ISP Appliance
> >server based on RH 7.0. Thanks.
>
>http://MenAndMice.com/DNS-training
>http://BIND8NT.MEIway.com : ISC BIND 8.2.4 for NT4 & W2K
>http://IMGate.MEIway.com : Build free, hi-perf, anti-abuse mail gateways