Non-authoritative answer (qtm.net)

[Mark.Andrews at nominum.com]

	The logs go to syslog by default so look at your syslog.conf
	to see where daemon logs are written.  Note the log file must
	exist for syslog to write to it.

	You can also adjust this via the logging clause.

	Mark

> 
> Actually I found it..
> growl
> I couldn't find where the logging was going, and I've got 2281 lines in
> my db.qtm file (a LOT to post to a list) so I started going through it..
> aparently I need to teach my techs that 216.163.32.509 is NOT a valid
> IP! =)  At least it was in the first 100 lines.. hehe
> 
> Any suggestions on where I can find this info in a log to make it easier
> next time would be appreciated!
> 
> Thanks =)
> 
> > -----Original Message-----
> > From: M.Ashcraft at epixtech.com [mailto:M.Ashcraft at epixtech.com]
> > Sent: Thursday, October 12, 2000 1:01 PM
> > To: Joseph Peterson
> > Cc: bind-users at isc.org
> > Subject: Re: Non-authoritative answer (qtm.net)
> > 
> > 
> > Your server is not claiming authority for your qtm.net.   
> > This is probably 
> > because of a typo on the db file.  Check your system logs 
> > from the last 
> > named restart for details on the error.  If you still can't 
> > figure it out 
> > post your config files.
> > 
> > Mike
> > 
> > --
> > Mike Ashcraft, Sr. Network Engineer
> > epixtech, Inc.
> > M.Ashcraft at epixtech.com
> > 
> 
> > 
> > 
> > 
> > Joseph Peterson <jay at qtm.net>
> > Sent by: bind-users-bounce at isc.org
> > 10/12/00 10:19 AM
> > 
> >  
> >         To:     "'comp-protocols-dns-bind at moderators.isc.org'" 
> > <comp-protocols-dns-bind at moderators.isc.org>
> >         cc: 
> >         Subject:        Non-authoritative answer (qtm.net)
> > 
> > 
> > Hmm.... I'm the Network Admin and I've got a bit of a problem with my
> > primary domain.
> > I will admit that bind/dns is not my strongest point, but when ya have
> > to know so many protocols and daemons its difficult to get 
> > every one of
> > them exactly right =)
> > 
> > > nslookup qtm.net
> > Server:  ns1.qtm.net
> > Address:  206.53.233.50
> > 
> > Non-authoritative answer:
> > Name:    qtm.net
> > Address:  216.163.32.50
> > 
> > Why is this? I have qtm.net   IN A 216.163.32.50 in my 
> > forward file and
> > 50.32.163.216.in-addr.arpa. IN PTR qtm.net. in my reverse file... any
> > ideas?
> > Thanks =)
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> 
> 
--
Mark Andrews, Nominum Inc.
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742                 INTERNET: Mark.Andrews at nominum.com