[Kea-users] DHCPSRV_NO_SOCKETS_OPEN problem
Stephen Berg, Code 7309
stephen.berg at nrlssc.navy.mil
Fri Feb 18 15:29:15 UTC 2022
I just figured out that although dnsmasq is disabled according to
systemd something is starting it at boot time. I think libvirtd or
gnome-boxes. Removed those and kea now starts up as expected.
On 2/18/2022 8:58 AM, Dan Oachs wrote:
> I am running kea 2.0.1 on Rocky Linux 8.5.
>
> My interfaces option is set to:
> "interfaces": ["eth0"]
>
> And I have ip helper addresses set for all the vlans to point dhcp
> traffic to this server.
>
> Are you 100% sure there is not some other process or dhcp server
> listening on port 67 on your server?
>
> I also have a second kea 2.0.1 server ( setup in HA mode with this
> server). The second server has an interface on each vlan so it can get
> the dhcp requests directly and not need them forwarded from the router.
>
> On this server the interfaces option looks like this:
> "interfaces": ["*"]
>
>
> --Dan
>
>
> On Fri, Feb 18, 2022 at 8:33 AM Stephen Berg, Code 7309 via Kea-users
> <kea-users at lists.isc.org> wrote:
>
> I'm evaluating kea 1.8 to eventually integrate into my network. I've
> got 6 subnets that I'll be managing eventually. Relay agents will
> be on
> all but one subnet. An initial install and test setup with mysql
> backend
> went okay but I have one show stopper problem now.
>
> Whenever I start the service I see in the log:
> DHCPSRV_OPEN_SOCKET_FAIL failed to open socket: failed to open
> socket on
> interface eth0, reason: failed to bind fallback socket to address
> <serverIP>, port 67, reason: Address already in use - is another DHCP
> server running?
> 2022-02-18 08:23:27.547 WARN [kea-dhcp4.dhcpsrv/3416.140158564502848]
> DHCPSRV_NO_SOCKETS_OPEN no interface configured to listen to DHCP
> traffic
>
> I changed dhcp-socket-type to udp to see if that would change the
> behavior and got this:
> 2022-02-18 08:14:13.653 WARN [kea-dhcp4.dhcpsrv/3218.139637232491840]
> DHCPSRV_OPEN_SOCKET_FAIL failed to open socket: failed to open
> socket on
> interface eth0, reason: Failed to bind socket 15 to <serverIP>/port=67
> 2022-02-18 08:14:13.653 WARN [kea-dhcp4.dhcpsrv/3218.139637232491840]
> DHCPSRV_NO_SOCKETS_OPEN no interface configured to listen to DHCP
> traffic
>
> This is running on a virtual machine, rocky linux 8.5. Selinux and
> firewall have been disabled for testing. Network seems fine on the
> system other than this. My initial config is just a couple of
> reserved
> address based on mac address and no pool. If I can get this
> working I
> plan to add reservations for all clients in each of the subnets.
>
> --
> Stephen Berg, IT Specialist, Ocean Sciences Division, Code 7309
> Naval Research Laboratory
> W: (228) 688-5738
> DSN: (312) 823-5738
> C: (228) 365-0162
> Email: stephen.berg at nrlssc.navy.mil <- (Preferred contact)
> Flank Speed: stephen.p.berg.civ at us.navy.mil
>
> --
> ISC funds the development of this software with paid support
> subscriptions. Contact us at https://www.isc.org/contact/ for more
> information.
>
> To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users.
>
> Kea-users mailing list
> Kea-users at lists.isc.org
> https://lists.isc.org/mailman/listinfo/kea-users
>
--
Stephen Berg, IT Specialist, Ocean Sciences Division, Code 7309
Naval Research Laboratory
W: (228) 688-5738
DSN: (312) 823-5738
C: (228) 365-0162
Email:stephen.berg at nrlssc.navy.mil <- (Preferred contact)
Flank Speed:stephen.p.berg.civ at us.navy.mil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/kea-users/attachments/20220218/69ff1e19/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4581 bytes
Desc: S/MIME Cryptographic Signature
URL: <https://lists.isc.org/pipermail/kea-users/attachments/20220218/69ff1e19/attachment-0001.bin>
More information about the Kea-users
mailing list