[Kea-users] Fwd: Memory leak on dhcp6
Nitzan Tzelniker
nitzan.tzelniker at gmail.com
Wed May 8 18:43:46 UTC 2019
Hi Marcin,
As far as I see in the PCAP most of the customer ask in separate packets
but I see few that ask for both in a single packet
If it will help I took a coredump during the issue
Regards
Nitzan
On Wed, May 8, 2019 at 4:51 PM Marcin Siodelski <marcin at isc.org> wrote:
> Nitzan,
>
> I just wanted to let you know that so far we were unable to reproduce
> the memory leak with duplicated server-id across the HA pair. Our test
> did not include prefix delegation, only IA_NAs. Are your clients
> requesting both address assignment and prefix delegation in the single
> transaction?
>
> Thanks,
>
> Marcin
>
> On 07/05/2019 10:49, Nitzan Tzelniker wrote:
> > Thanks for your support.
> > Unless I miss it in the logs it might also be a good idea to have error
> > message if both servers have the same server-id
> >
> > Thanks
> >
> > Nitzan
> >
> > On Tue, May 7, 2019 at 11:45 AM Marcin Siodelski <marcin at isc.org
> > <mailto:marcin at isc.org>> wrote:
> >
> > Hello Nitzan,
> >
> > Thank you for sharing this information. We'll try to reproduce this
> > behavior on our end. If the problem occurs, we'll investigate and
> fix it
> > because the duplicate server id is surely not a good reason for
> leaking
> > memory.... ;-)
> >
> > Marcin Siodelski
> >
> > DHCP Software Engineer,
> > ISC
> >
> > On 07/05/2019 10:26, Nitzan Tzelniker wrote:
> > > Hi,
> > >
> > > Just for anybody else that has this issue
> > > The issue was that I had the same server-id on both servers as we
> > clone
> > > the VM of the first server after it create the server-id
> > > I dont know why it cause memory leak.
> > >
> > > Thenks
> > >
> > > Nitzan
> > >
> > >
> > > On Mon, May 6, 2019 at 6:56 PM Marcin Siodelski <marcin at isc.org
> > <mailto:marcin at isc.org>
> > > <mailto:marcin at isc.org <mailto:marcin at isc.org>>> wrote:
> > >
> > > Hi Nitzan,
> > >
> > > We're trying to reproduce this issue using our test tools. If
> > the leak
> > > is related to the traffic volume processed by the server, it
> > would be
> > > useful for us to know the average number of packets/second
> > that your
> > > primary server is receiving.
> > >
> > > You say that the memory consumption grows to 28% within an
> > hour but I
> > > don't know how many packets the server has received and
> > processed to
> > > reach that level. If you can provide the average DHCP traffic
> > rate we
> > > can craft the test that best mirrors your situation and
> > confirm whether
> > > or not we see the same thing.
> > >
> > > Thanks in advance,
> > >
> > > Marcin Siodelski
> > > DHCP Software Engineer,
> > > ISC
> > >
> > > On 05/05/2019 16:29, Nitzan Tzelniker wrote:
> > > > Hi,
> > > >
> > > > It seems that the issue is related to the HA
> > > > After I commented the HA part the memory consumption is
> > stayed low
> > > > I am adding the relevant configuration if you have any idea
> > > >
> > > > Thanks
> > > >
> > > > Nitzan
> > > >
> > > > Standby server ha configuration part:
> > > >
> > > > "hooks-libraries": [
> > > > {
> > > > "library":
> > "/usr/local/lib/hooks/libdhcp_lease_cmds.so",
> > > > "parameters": { }
> > > > },
> > > > {
> > > > "library": "/usr/local/lib/hooks/libdhcp_ha.so",
> > > > "parameters": {
> > > > "high-availability": [ {
> > > > "this-server-name": "KEA_DHCPv6_2",
> > > > "mode": "hot-standby",
> > > > "heartbeat-delay": 10000,
> > > > "max-response-delay": 20000,
> > > > "max-ack-delay": 10000,
> > > > "max-unacked-clients": 0,
> > > > "peers": [
> > > > {
> > > > "name": "KEA_DHCPv6_1",
> > > > "role": "primary",
> > > > "auto-failover": true
> > > > },
> > > > {
> > > > "name": "KEA_DHCPv6_2",
> > > > "role": "standby",
> > > > "auto-failover": true
> > > > }
> > > > ]
> > > > } ]
> > > > }
> > > > }
> > > > ]
> > > > }
> > > >
> > > > kea-ctrl-agent.conf from both servers (Only the ip address
> is
> > > different )
> > > >
> > > > {
> > > >
> > > > "Control-agent": {
> > > > "http-host": "1.1.1.X",
> > > > "http-port": 8080,
> > > >
> > > > "control-sockets": {
> > > > "dhcp4": {
> > > > "socket-type": "unix",
> > > > "socket-name": "/tmp/kea-dhcp4-ctrl.sock"
> > > > },
> > > > "dhcp6": {
> > > > "socket-type": "unix",
> > > > "socket-name": "/tmp/kea-dhcp6-ctrl.sock"
> > > > }
> > > > },
> > > >
> > > > "hooks-libraries": [
> > > > ]
> > > > },
> > > >
> > > > "Logging":
> > > > {
> > > > "loggers": [
> > > > {
> > > > "name": "kea-ctrl-agent",
> > > > "output_options": [
> > > > {
> > > > "output":
> > "/usr/local/var/log/kea-ctrl-agent.log"
> > > > }
> > > > ],
> > > > "severity": "INFO",
> > > >
> > > > "debuglevel": 0
> > > > }
> > > > ]
> > > > }
> > > > }
> > > > ---------- Forwarded message ---------
> > > > From: *Nitzan Tzelniker* <nitzan.tzelniker at gmail.com
> > <mailto:nitzan.tzelniker at gmail.com>
> > > <mailto:nitzan.tzelniker at gmail.com
> > <mailto:nitzan.tzelniker at gmail.com>>
> > > > <mailto:nitzan.tzelniker at gmail.com
> > <mailto:nitzan.tzelniker at gmail.com>
> > > <mailto:nitzan.tzelniker at gmail.com
> > <mailto:nitzan.tzelniker at gmail.com>>>>
> > > > Date: Fri, May 3, 2019 at 10:13 PM
> > > > Subject: Memory leak on dhcp6
> > > > To: <kea-users at lists.isc.org
> > <mailto:kea-users at lists.isc.org> <mailto:kea-users at lists.isc.org
> > <mailto:kea-users at lists.isc.org>>
> > > <mailto:kea-users at lists.isc.org
> > <mailto:kea-users at lists.isc.org> <mailto:kea-users at lists.isc.org
> > <mailto:kea-users at lists.isc.org>>>>
> > > >
> > > >
> > > > Hi,
> > > >
> > > > I am running two dhcpv6 server with high-availability
> > > > We have about 2500 regular leases and 2500 PD leases
> > > > The setup is working but it look like kea-dhcp6 leak memory
> > > > When it start (with all of the leases in the file ) it take
> less
> > > then 1%
> > > > of the memory but after two hours it take 28% and if I will
> > give it 8
> > > > hours it will crash
> > > >
> > > > I don't see issue on the standby server only on the primary
> > server
> > > >
> > > > Anybody saw this behavior
> > > > Any idea how to debug it
> > > >
> > > > kea-dhcp6 -V
> > > > 1.5.0
> > > > tarball
> > > > linked with:
> > > > log4cplus 1.1.3
> > > > OpenSSL 1.0.2k-fips 26 Jan 2017
> > > > database:
> > > > Memfile backend 2.1
> > > >
> > > > Running on CentOS 7.6.1810 VM kernel 3.10.0-957.1.3.el7.x86
> > with 2 *
> > > > vCPU and 2GB RAM
> > > >
> > > > bellow is the dhcp6 config file omitting 102 subsets
> > > >
> > > > {
> > > > "Dhcp6": {
> > > > "interfaces-config": {
> > > > "interfaces": [ "ens192/1111:aef:aa77:83::100" ]
> > > > },
> > > > "mac-sources": [ "docsis-cmts",
> "client-link-addr-option" ],
> > > >
> > > > "control-socket": {
> > > > "socket-type": "unix",
> > > > "socket-name": "/tmp/kea-dhcp6-ctrl.sock"
> > > > },
> > > >
> > > > "lease-database": {
> > > > "type": "memfile",
> > > > "lfc-interval": 3600
> > > > },
> > > > "expired-leases-processing": {
> > > > "reclaim-timer-wait-time": 10,
> > > > "flush-reclaimed-timer-wait-time": 25,
> > > > "hold-reclaimed-time": 3600,
> > > > "max-reclaim-leases": 100,
> > > > "max-reclaim-time": 250,
> > > > "unwarned-reclaim-cycles": 5
> > > > },
> > > >
> > > > "renew-timer": 1000,
> > > > "rebind-timer": 2000,
> > > > "preferred-lifetime": 3000,
> > > > "valid-lifetime": 4000,
> > > > "option-data": [
> > > > {
> > > > "name": "dns-servers",
> > > > "data": "1111:aef:aa77:1::22,
> 1111:aef:aa77:2::22"
> > > > }
> > > > ],
> > > > "subnet6": [
> > > > {
> > > > "subnet": "1111:aec:0:10::/64",
> > > > "pools": [ { "pool":
> > > > "1111:aec:0:10::10-1111:aec:0:10:ffff::" } ],
> > > > "pd-pools": [
> > > > {
> > > > "prefix": "1111:aec:10::",
> > > > "prefix-len": 44,
> > > > "delegated-len": 56
> > > > }
> > > > ]
> > > > },
> > > > //....
> > > > // 101 more subnets
> > > > //....
> > > > "hooks-libraries": [
> > > > {
> > > > "library": "/usr/local/lib/hooks/libdhcp_ha.so",
> > > > "parameters": {
> > > > "high-availability": [ {
> > > > "this-server-name": "KEA_DHCPv6_1",
> > > > "mode": "hot-standby",
> > > > "heartbeat-delay": 10000,
> > > > "max-response-delay": 20000,
> > > > "max-ack-delay": 10000,
> > > > "max-unacked-clients": 0,
> > > > "peers": [
> > > > {
> > > > "name": "KEA_DHCPv6_1",
> > > > "role": "primary",
> > > > "auto-failover": true
> > > > },
> > > > {
> > > > "name": "KEA_DHCPv6_2",
> > > > "role": "standby",
> > > > "auto-failover": true
> > > > }
> > > > ]
> > > > } ]
> > > > }
> > > > }
> > > > ]
> > > > },
> > > >
> > > > "Logging":
> > > > {
> > > > "loggers": [
> > > > {
> > > > "name": "kea-dhcp6",
> > > > "output_options": [
> > > > {
> > > > "output": "/usr/local/var/log/kea-dhcp6.log"
> > > > }
> > > > ],
> > > > "severity": "INFO",
> > > >
> > > > "debuglevel": 0
> > > > }
> > > > ]
> > > > }
> > > > }
> > > > Thanks
> > > >
> > > > Nitzan
> > > >
> > > > _______________________________________________
> > > > Kea-users mailing list
> > > > Kea-users at lists.isc.org <mailto:Kea-users at lists.isc.org>
> > <mailto:Kea-users at lists.isc.org <mailto:Kea-users at lists.isc.org>>
> > > > https://lists.isc.org/mailman/listinfo/kea-users
> > > >
> > >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/kea-users/attachments/20190508/c45a6edb/attachment.htm>
More information about the Kea-users
mailing list