[Kea-users] [Kea] subnet or shared network selected for multiple relays

[Marcin Siodelski]

Unfortunately, it isn't possible for the shared networks too. The shared
network pretty much derives parameters from the subnet. Or, maybe I
should say a subnet derives from the shared network.

Marcin Siodelski
ISC

On 24.11.2017 18:46, Chaigneau, Nicolas wrote:
> Hello,
> 
>  
> 
>  
> 
> I would like to configure a subnet shared by multiple relays, i.e. that
> would be chosen for several “giaddr” values.
> 
> If I’m not mistaken, this was not possible with the basic “subnet4”
> configuration prior to 1.3.0 (as parameter “relay” does not support a
> list of relays).
> 
>  
> 
> Can I achieve that with a shared network in 1.3.0 ?
> 
>  
> 
> I’ve read Kea admin guide but I’m not sure this is possible just with
> configuration.
> 
> I have the impression that “relay” still can only be one element, either
> for the “shared-networks” or for each of its “subnet4” components.
> 
>  
> 
>  
> 
>  
> 
> Regards,
> 
> Nicolas.
> 
>  
> 
>  
> 
> This message contains information that may be privileged or confidential
> and is the property of the Capgemini Group. It is intended only for the
> person to whom it is addressed. If you are not the intended recipient,
> you are not authorized to read, print, retain, copy, disseminate,
> distribute, or use this message or any part thereof. If you receive this
> message in error, please notify the sender immediately and delete all
> copies of this message.
> 
> 
> 
> _______________________________________________
> Kea-users mailing list
> Kea-users at lists.isc.org
> https://lists.isc.org/mailman/listinfo/kea-users
>