Option 82 problem
Александр Сандецкий
alexander.sandetsky at gmail.com
Fri Apr 17 14:18:24 UTC 2020
Hi!
I have a problem with option 82 configuration.
I have managed switch with IP 10.10.0.38 (managed VLAN 100). There is
additional VLANs configured for clients: VLAN 3000 and 3010. There is
option 82 and DHCP relay configured on the switch.
I have DHCP server placed in VLAN 3000 with IP 172.18.0.101
I want to DHCP server serves the VLAN 3010 (and other) on per-VLAN basis.
The part of dhcpd.conf
class "VLAN3010" {
match if binary-to-ascii(10, 8, "", substring(option
agent.circuit-id, 2, 2)) = "3010"
}
subnet 172.18.10.0 netmask 255.255.255.0 {
option routers 172.18.0.1;
pool {
range 172.18.10.51 172.18.10.250;
allow members of "VLAN3010";
}
}
The server receives request as
DHCPDISCOVER from 2c:27:d7:b1:a2:85 via 10.10.0.38: network 10.10.0.0/24:
no free leases
I have checked with Wireshark
Option: (82) Agent Information Option
Length: 18
Option 82 Suboption: (1) Agent Circuit ID
Length: 6
Agent Circuit ID: 00040bc20003
Option 82 Suboption: (2) Agent Remote ID
Length: 8
Agent Remote ID: 00068026897b2b40
There is binary encoded agent circuit id that contains "0bc2" bytes that
equal to "3010" in decimal.
Why my class definition does not accept this request? What is wrong?
--
Regards,
Alexander
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20200417/6393929c/attachment.htm>
More information about the dhcp-users
mailing list