Problems using class match by user-option

[Sven Schumacher]

Hello,

I have the following problem: two many clients within a limited range of
IP-addresses.
I would like to sort the clients which get dynamically their IP in two
pools. One of them is for PXE-Clients or Clients with "official"
ip-adresses, the other one for "nat"-able Clients. But only
"known-clients" shall be assigned an address (later on there might be
the option to assign unknown-clients a third range within a third pool
with no internet-access and in an isolated ip-range, which gets blocked
by firewall on all other devices). So I tried the following in dhcpd.conf:


option tfd-scope-identifier code 230 = text;

class "gaeste" {
  match if (config-option tfd-scope-identifier = "gaeste");
}

shared-network tfd {

    subnet 10.69.0.0 netmask 255.255.0.0 {
      deny unknown-clients;
      ...
    }
    subnet 130.75.69.0 netmask 255.255.255.0 {
      deny unknown-clients;
      ...
    }

     host test1 {
         hardware ethernet aa:bb:cc:dd:ee:ff;
         option tfd-scope-identifier "gaeste";
     }
     host test2 {
         hardware ethernet bb:cc:dd:ee:ff:aa;
     }
      pool { # host test2 should get IP of this pool
          range 130.75.69.50 130.75.69.60;
          deny members of "gaeste";
          ....
      }
      pool { # host test1 should get IP of this pool, but didn't
          range 10.69.253.1 10.69.253.254;
          option routers 10.69.0.251;
          allow members of "gaeste";
      }
}



But when I did this, test2 still got an IP of the address range
130.75.69.50 to 130.75.69.60. So the class-match for the config-option
seems to be wrong.
Looking at my syslog only DHCPDISOVER, DHCPREQEST and DHCPACK Messages
are logged.
Is there any way to "debug" the class-match like more verbose output?

Thanks in advance

Sven
     

-- 
Sven Schumacher - Systemadministrator Tel: (0511)762-2753
Leibniz Universitaet Hannover
Institut für Turbomaschinen und Fluid-Dynamik       - TFD
Appelstraße 9 - 30167 Hannover
Institut für Kraftwerkstechnik und Wärmeübertragung - IKW
Callinstraße 36 - 30167 Hannover


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4971 bytes
Desc: S/MIME Cryptographic Signature
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20171207/c8c6ff43/attachment-0001.bin>