DHCPv6 Client Configuration

[Luca]

another tip: if i try to ping FF02::1 from the client (multicast address for
all LAN nodes) i can't reach the server machine and his VLAN. Only localhost
and switch. If i can't reach server with a multicast request i guess relay
agent won't work as well

2011/10/22 Luca <luca.bahamut at gmail.com>

> you mean i must pick a global address for the relay matching the server
> subnet?
>
> (example: dhcrelay -I -l 2001:760:2e04:f001::3%eth0 -u
> 2001:760:2e04:f001::2%eth0  ??)
>
>
> Thanks for reply
>
>
> 2011/10/22 Bjørn Mork <bjorn at mork.no>
>
>> Luca <luca.bahamut at gmail.com> writes:
>>
>> > for Client i am using:
>> >
>> > dhcrelay -I -l eth0 -u 2001:760:2e04:f001::2%eth0
>> >
>> > ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:02:A5:4B:8C:56 inet6
>> addr:
>> > fe80::202:a5ff:fe4b:8c56/64 Scope:Link UP BROADCAST RUNNING PROMISC
>> > MULTICAST MTU:1500 Metric:1 RX packets:16689 errors:0 dropped:0
>> overruns:0
>> > frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0
>> > txqueuelen:1000 RX bytes:2350223 (2.2 MiB) TX bytes:67508 (65.9 KiB)
>> >
>> >
>> > when i start the relay agent i get:
>> >
>> > Listening on Socket/eth0
>> > Sending on   Socket/eth0
>> > Can't find link address for interface 'eth0'.
>>
>> The relay agent must have an address with a matching scope, or it cannot
>> communicate with the server.  I.e. you must either use a link local
>> address for the server, or allocate a global address for the relay.
>>
>>
>> Bjørn
>> _______________________________________________
>> dhcp-users mailing list
>> dhcp-users at lists.isc.org
>> https://lists.isc.org/mailman/listinfo/dhcp-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20111024/0c634d72/attachment.html>