DHCP Multiple VLAN problem
Allie Hopkins
allie at lsu.edu
Thu Jul 19 22:40:51 UTC 2007
This is what I have for my avaya setup here. Would this work for you?
class "avaya-phones" {
match if (substring (hardware, 1, 3) = 00:04:0d);
option op176...
....
....
}
#DSCRP:Various
shared-network Various {
subnet 130.39.118.0 netmask 255.255.254.0 {
ignore client-updates;
option routers 130.39.118.1;
option broadcast-address 130.39.119.255;
# known clients get this pool.
pool {
.
.
.
allow known-clients;
allow members of "avaya-phones";
deny dynamic bootp clients;
deny members of "ras-servers";
deny members of "deny";
}
}
subnet 10.39.118.0 netmask 255.255.255.0 {
ddns-updates off;
option routers 10.39.118.1;
#unknown clients get this pool.
pool {
.
.
.
allow unknown clients;
deny members of "ras-servers";
deny members of "avaya-phones";
allow members of "RIS-Clients";
}
}
}
On Thu, 2007-07-19 at 22:10 +0000, Scott F wrote:
>
> Hi,
>
> I am having a bit of a problem trying to get some IP Phones (Mitel) working with ISC DHCP 3
>
> Basically we have 2 subnets set up in a shared network. One is for the
> VLAN1 data traffic and the other is for the VLAN 10 voice traffic. The
> DHCP Server is in VLAN1 and there is an IP Helpr set up to forward the
> DHCP traffic from VLAN1 to 10 (on the 3com 5500). On the VLAN 1 subnet
> all the computers are statically assigned addresses by MAC. I have set
> up two pools of addresses, one of VLAN1 range and the other on VLAN 10
> range. When the phones start up they are on VLAN1 and broadcast for an
> address, they get one along with other options that tell it that it
> should be on VLAN10, the phone releases its address and comes up on
> VLAN10 where it broadcasts and gets an address in the VLAN10 range,
> because the request comes from the helper, all seems to work ok.
> However, work want to have the pools set so people can't just plug in
> any device and get an address, but whenever I put any sort of
> conditional statement in DHCPd sees this as the most specific option
> and goes to the subnet containing it ignorning whether it has come by
> the helper or not. I even tried setting up the 3com switch to add
> option 82 info to the DHCP packet so I could ID which VLAN the request
> was from, this worked fine except the switch only tagged the first
> packet from VLAN10 (the DHCPDISCOVER), the next one ( DHCPREQUEST)
> wasn't tagged so the server sees it as being in VLAN1.
>
> Any ideas anyone? this is driving me up the wall
> _________________________________________________________________
> The next generation of MSN Hotmail has arrived - Windows Live Hotmail
> http://www.newhotmail.co.uk
>
More information about the dhcp-users
mailing list