multiple dhcp relay configuration
Simon Hobson
dhcp1 at thehobsons.co.uk
Wed Nov 8 06:41:33 UTC 2006
At 09:48 +0530 8/11/06, <tajinder.pal at wipro.com> wrote:
>We can ping from vintcerf to dijkstra 192.168.2.1
>
>No filtering problem. If we remove the Hamming machine relay works fine
>and client gets the ip.
>
>Dhcp range is also ok
>
>Actually server is replying with range address but it is not reaching
>upto Dijkstra. It is reaching upto Hamming eth1 interface but not after
>that.
>
>That's why we tried double relay and all other options.
>
>Even we tried to peek into the packet headers using tcpdump. Following
>is the output from eht1 interface of Hamming.
>
>=========================
>
>[root at Hamming ~]# tcpdump -i eth1 -v | grep Reply
>tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 96
>bytes
>09:51:34.656926 IP (tos 0x0, ttl 64, id 22143, offset 0, flags [DF],
>proto: UDP
> (17), length: 328) 192.168.0.1.bootps > 192.168.2.1.bootps: BOOTP/DHCP,
>Reply,
>length: 300, hops:2, xid:0x9a16f10e, flags: [none]
> IP (tos 0x0, ttl 63, id 22143, offset 0, flags [DF], proto: UDP
>(17), l
>ength: 328) 192.168.0.1.bootps > 192.168.2.1.bootps: BOOTP/DHCP, Reply,
>length:
>300, hops:2, xid:0x9a16f10e, flags: [none]
>29 packets captured
>58 packets received by filter
>0 packets dropped by kernel
>
>==========================
So it looks like the reply is reaching the relay but not being
processed there. I can't help any more as I've never used the ISC
relay.
Can you post the config file for the clients dhcpc, and the command
line it's being invoked with ? Hopefully someone else can pick it up
from here.
More information about the dhcp-users
mailing list