multiple dhcp relay configuration
Simon Hobson
dhcp1 at thehobsons.co.uk
Tue Nov 7 09:51:15 UTC 2006
<tajinder.pal at wipro.com> wrote:
>I am trying to configure two relays both at different nets and one
>client and one server connecting like below
>
>
>DHCP Client -------------------------> DHCP Relay 1
>--------------------> DHCP Relay 2 -----------------------> DHCP
>Server
> eth0 192.168.2.x eth0 eth2 192.168.1.x
>eth2 eth1 192.168.0.x eth1
>
>How should I give configuration so that Client can have IP address. I
>am using open source dhcp-3.0.3 from ISC with Linux kernel 2.6
Relay 2 is not required, you only need a relay agent on the subnet to
which the client is physically attached. Relay 1 should be forwarding
requests directly to the server - and as it does this via unicast
packets, it does not matter what is in between as long as you have
all your routing set up.
More information about the dhcp-users
mailing list