Own root cache for outside resolutios , possible?

Joaquin J. Domens jdomens at corp.terra.es
Fri Jun 21 12:11:29 UTC 2002


Urks, wrong message :-)

"Joaquin J. Domens" wrote:

> Thanks Bill, Simon, for your quick response :-)
>
> Just after sending the messages I remembered the forward option, the thing was
> that i was not sure about serving his own authoritative zones.
>
> I've set up all the internal zones in dnsinternal and I've put all other dns's
> with internet access as forwarders, so that dnsinternal ask the others for
> internet resolution and it seems to work as i wanted.
>
> Anyway I've find very useful your comments about it.
>
> Thanks a lot ;-)
>
> "Stephens, Bill {PBSG}" wrote:
>
> > DIG returns the correct SOA, and successfully returns a full zone transfer.
> > I'm pretty sure it's not a corrupt zone file or named.conf.  I have a
> > cross-over cable between the two servers.  I added the IP address of the
> > masters cross-over, and the transfer took off!  I have the server defitition
> > set to transfer-format many-answers;transfers 160;};  The non-crossover
> > segment is on a 100mb switched Ethernet segment what could be constipating
> > the transfer?  CPU on both master and slave run <5%, out of 512mb I'm only
> > using about 150mb.
> >
> > This zone has about 15 slave servers, I've tried trimming it down to 3 and
> > still had the same problem.
> >
> >
> >
> >
> > Bill Stephens
> > PepsiCo Business Solutions Group
> > Bill.Stephens at pbsg.com
> > 972.376.7155      fax: 972.376.6019
> >
> >
> >
> > -----Original Message-----
> > From: Jim Reid [mailto:jim at rfc1035.com]
> > Sent: Thursday, June 20, 2002 4:27 PM
> > To: Stephens, Bill {PBSG}
> > Cc: bind-users at isc.org
> > Subject: Re: Zone Transfer Prob.
> >
> > >>>>> "Bill" == Stephens, Bill {PBSG} <Bill.Stephens at pbsg.com> writes:
> >
> >     Bill> Ok, now I'm getting somewhere.  I'm starting to receive this
> >     Bill> error:
> >
> >     Bill> 20-Jun-2002 15:53:02.967 load: warning: Zone "myzone.com"
> >     Bill> (file /var/named /sec/db.myzone.com): no SOA RR found
> >
> >     Bill> I've checked the soa record, and the newsgroups.  I have the
> >     Bill> spaces before and after the ( ).  Any other ideas?
> >
> > Since you've not shown *exactly* what's in the zone file, it's hard to
> > say what's wrong with it other than what the name server has reported:
> > the zone file has no SOA record. So the file is broken or corrupt in
> > some way. If your server is a slave (secondary) for myzone.com -- why
> > didn't you give the actual zone name? -- I suggest you move the old
> > zone file and reload the server. It should then transfer the zone from
> > the master (primary) server and write a new copy of the zone file. You
> > can then compare the old and new versions and that might explain what
> > was wrong with the old one if you can be bothered to care about that.
>
> --
> --------------------------------------------------
> Joaquin J. Domens
> Área de Tecnología
> Departamento de Producción / Aplicaciones
> --------------------------------------------------
> Terra Networks España S.A.
> Julián Camarillo, 6
> 28037 Madrid, España
> joaquin.domens at corp.terra.es
> --------------------------------------------------
> Mercado Continuo: TRR |  Nasdaq: TRLY
> --------------------------------------------------
> http://www.terra.es
> --------------------------------------------------

--
--------------------------------------------------
Joaquin J. Domens
Área de Tecnología
Departamento de Producción / Aplicaciones
--------------------------------------------------
Terra Networks España S.A.
Julián Camarillo, 6
28037 Madrid, España
Tel. (34) 91-375 2384 Fax (34) 91-375 2320
joaquin.domens at corp.terra.es
--------------------------------------------------
Mercado Continuo: TRR |  Nasdaq: TRLY
--------------------------------------------------
http://www.terra.es
--------------------------------------------------




More information about the bind-users mailing list