DNS in natted DMZ (private ip)
Adam Lang
aalang at rutgersinsurance.com
Wed May 30 14:59:47 UTC 2001
Yeah, I'd assume it is common. I'm in the process of setting up a new one
behind a Cisco PIX.
Your best friend is the archives. This has been talked about much and you
could probably find a lot of useful info in them.
Adam Lang
Systems Engineer
Rutgers Casualty Insurance Company
http://www.rutgersinsurance.com
----- Original Message -----
From: "Matthew Hellman" <mhellman at qwest.net>
Newsgroups: comp.protocols.dns.bind
To: <comp-protocols-dns-bind at moderators.isc.org>
Sent: Friday, April 13, 2001 9:47 AM
Subject: DNS in natted DMZ (private ip)
>
> I'm just looking for general information on how I set this up. I'm new
> to bind. I have a 3-homed firewall. One interface goes to the
> Internet, one to the DMZ and one to the internal network. I'm thinking
> of setting up a split-zone server in the DMZ. What kind of tom-foolery
> will I have to resort to [if any] to get this working on a host with a
> private address in the DMZ? Is it fairly common for a DNS server to be
> setup this way? TIA,
>
> Matt
More information about the bind-users
mailing list