Working Now: kill -HUP `cat /etc/named.pid` does not reload name server
LaConte, Rachel
Rachel.LaConte at voicestream.com
Mon Mar 12 20:39:35 UTC 2001
To all:
I upgraded to 9.1.1rc1. I am running Solaris 7 and like to get the
precompiled versions from Sun Freeware. The ftp sites did
not have 9.1.1rc4 for Solaris 7, only Solaris 8.
This now works!
kill -HUP <named_pid>
Thank you for everyones input!
Rachel
> -----Original Message-----
> From: Mark.Andrews at nominum.com [SMTP:Mark.Andrews at nominum.com]
> Sent: Friday, March 09, 2001 4:20 PM
> To: LaConte, Rachel
> Cc: 'Osman Shoukry'; 'bind-users at isc.org'
> Subject: Re: kill -HUP `cat /etc/named.pid` does not reload name
> server
>
>
> Why do people fight the suggestions to upgrade?
>
> 706. [bug] Zones with an explicit "allow-update { none; };"
> were considered dynamic and therefore not reloaded
> on SIGHUP or "rndc reload".
>
> Mark
>
> >
> >
> > Thanks Osman,
> >
> > Actually, I normally check the pid using ps and then use it to -HUP the
> pid.
> > But, it is in /var/named and has the
> > current pid. I almost never forget to change the serial # in the zone
> files
> > when I make changes. :)
> >
> > Any other ideas?
> >
> > Rachel
> > > -----Original Message-----
> > > From: Osman Shoukry [SMTP:oshoukry at onepage.com]
> > > Sent: Friday, March 09, 2001 10:23 AM
> > > To: LaConte, Rachel
> > > Subject: RE: kill -HUP `cat /etc/named.pid` does not reload name
> > > server
> > >
> > > check that named.pid exists in /var/named/ and check to see it's
> contents
> > > actually match the proccess ID of the running named.
> > >
> > > Also make sure that when you did changes in the zones you have
> incremented
> > > the serial #.
> > >
> > >
> > > -----Original Message-----
> > > From: LaConte, Rachel [ <mailto:Rachel.LaConte at voicestream.com>]
> > > Sent: Friday, March 09, 2001 10:06 AM
> > > To: 'bind-users at isc.org'
> > > Subject: kill -HUP `cat /etc/named.pid` does not reload name server
> > >
> > >
> > >
> > >
> > > I have upgraded bind from 8.2.2p5 to 9.1.0. I tried using, kill -HUP
> `cat
> > >
> > > /var/named/named.pid`, and it does not work anymore. Changes
> > > that I have made to the zone files are not updated, when I use dig or
> > > nslookup.
> > >
> >
> --
> Mark Andrews, Nominum Inc.
> 1 Seymour St., Dundas Valley, NSW 2117, Australia
> PHONE: +61 2 9871 4742 INTERNET: Mark.Andrews at nominum.com
More information about the bind-users
mailing list