Problem with 9.1.1
Federico Bockel
fbockel at arnet.com.ar
Tue Apr 17 18:36:30 UTC 2001
Mark,
I will correct the TTL.
Datasize is a % of server memory, ram + swap, or only ram?
What % of the server memory would you recommend me to use?
How can I check if this is the problem?
Thanks,
Federico Bockel
-----Original Message-----
From: bind-users-bounce at isc.org [mailto:bind-users-bounce at isc.org] On
Behalf Of Mark.Andrews at nominum.com
Sent: Wednesday, April 18, 2001 3:25 AM
To: Federico Bockel
Cc: bind-users at isc.org
Subject: Re: Problem with 9.1.1
>
> Hi, i have 3 ns, 1 primary, 2 slaves, running Bind 9.1.1 on solaris 7.
> This is the problem.
>
> I get this two errors on log:
>
> Apr 18 00:24:17.298 general: warning: dns_master_load:
> slave/macrosa.com.ar:1
> 0: $TTL 3306160128 > MAXTTL, setting $TTL to 0
> Apr 18 00:24:26.515 general: info: running
Well give it a sane TTL value. Anything above 7 days is self
defeating as most nameservers use 7 days as a upper bound on
the TTL when it is cached.
>
> After that, all the zones ~2000, got a refresh_talkback, this happens
> everyti me i start the named. The thing is, that the 3 ns are in the
> same vlan, with no firewall or anythin g blocking the communication on
> port 53, so i dont know why it says time out for 200.45.0.114 (the
> primary) (the slave s have other primarys for some zones, these zones
> also got this error)
>
> Apr 18 00:24:45.090 general: info: refresh_callback: zone
> energia.com.ar/IN:
> failure for 200.45.0.114#53: timed out
> Apr 18 00:24:45.610 general: info: refresh_callback: zone
grupotradis.com.ar/
> IN: failure for 200.45.0.114#53: timed out
> Apr 18 00:24:45.610 general: info: refresh_callback: zone
travelpass.com.ar/I
> N: failure for 200.45.0.114#53: timed out
> Apr 18 00:24:45.610 general: info: refresh_callback: zone
agf-allianz.com.ar/
> IN: failure for 200.45.0.114#53: timed out
>
> But, when i change a zone, the serial, and hup named on primary works
> ok repl icating the zone changes, so, what is this problem?
The nameserver is extremely busy at startup and the answers
havn't
arrived / been processed in time. The nameserver will retry
later.
These messages are only a problem if they continue which from
your
comments they don't.
>
> This week, a lot of times happened that the service stops responding
> querys a nd i have to do a kill -9 and start it again cause wont
> respond with a HUP i dont know if this is related to the large volume
> of errors (refresh_talkback) sended to the log file and this somehow s
> lowing the service performance, and taking it to a still.
>
> Any help on this problems, specially any idea why the named hangs if
> its rela ted to this, or not, would be great! Thanks!
It sounds like it is running out of per-process memory. Use
datasize to up the amount available.
Mark
>
> Federico Bockel
--
Mark Andrews, Nominum Inc.
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742 INTERNET:
Mark.Andrews at nominum.com
More information about the bind-users
mailing list